The Less'n'more Athene Wall / Ceiling Light A-BDL1 is a surface-mounted lamp with a flexible lamp arm. The lamp arm can be stretched and bent as desired. At maximum extension of the lamp arm, the wall and ceiling lamp has a length of 31 cm. The flexible lamp arm is available in the following colours: aluminum, textile black, white, anthracite, blue, green, red and brown. A lamp head made of aluminum is attached to the end of the arm. An LED with a colour temperature of 2,700 Kelvin extra warm white is included. The aluminum canopy / wall bracket has a diameter of 6.5 cm.
This Athene lamp can be used as a wall or ceiling lamp. Lamp head and canopy are offered in the surfaces aluminum, black and white. This Athene wall and ceiling lamp is available dimmable on site with a trailing edge phase dimmer or with an integrated push button dimmer on the canopy. The version with push button dimmer can be switched and dimmed via the push button. The beam angle of the light can be adjusted between 25 and 100 degrees at the lamp head. To do this, the glass lens is turned out of or back into the head. With a larger beam angle, the light is distributed over a larger area.
In addition to this wall and ceiling lamp, a larger lamp with a maximum length of 62 cm is also available from Less'n'more. On request, the Athene Wall / Ceiling Light A-BDL1 is also offered with special colours for the lamp arm or with a Protective contact plug for operation at a power socket. A canopy mounting plate is offered as an accessory, with which the lamp can be mounted over a flush-mounted box.