The Less'n'more Zeus Recessed Light Z-EL2 can be mounted into a table. Thanks to its flat mounting plate with a diameter of 6 cm, it is possible to install this recessed lamp flush with the surface. The external transformer supplied can only be mounted from the rear outside the mounting plate. M5 thread screws are not included in the scope of delivery. The lamp can also be built into walls or ceilings. The Zeus Recessed Lamp has a flexible lamp arm that can be stretched and bent as required. With a maximum extension of the lamp arm, the lamp has a height or length of 52 cm. The flexible lamp arm is available in these colours: Aluminum, textile black, white, anthracite, blue, green, red and brown.
Lamp head and mounting plate are available in the surfaces aluminum, black and white. The beam angle of the light can be adjusted continuously between 15 and 75 degrees by turning the glass lens out of or into the lamp head. With a larger beam angle, the light is distributed over a larger area.
The Zeus Recessed Lamp Z-EL2 is operated with an integrated LED with a colour temperature of 2,700 Kelvin extra warm white. The lamp is available in two versions: on site dimmable with a trailing edge phase dimmer or with an integrated push button dimmer on the mounting plate. The version with push button dimmer can be switched and dimmed via the push button. The flexible lamp arm is also available in other colours on request. Besides this recessed lamp, Less'n'more also offers a smaller lamp with a maximum height of 21 cm.