The Loom Design Lucerna 30 Solar / Hybrid Wall is a wall light with rechargeable battery and integrated solar panel. For charging, the lamp can simply be taken off the wall bracket to be charged via the solar panel integrated on top of the lamp or via an included USB cable. Depending on the brightness setting, the battery lasts between nine and twenty hours. A touch dimmer and a sensor switch are located on top of the lamp. Briefly pressing the touch dimmer switches the lamp on or off. A long press dims the light continuously from 5% to 100%. In addition, the colour temperature can be changed from 2,700 Kelvin extra warm white to 3,000 Kelvin warm white by pressing the touch dimmer for four seconds. The sensor switch is used to set the lamp to switch on or off automatically at dusk. The last settings for brightness and colour temperature are saved via the memory function and automatically selected the next time the light is switched on.
The Lucerna 30 Solar / Hybrid Wall looks like a classic lantern. It also illuminates itself when switched on. The wall lamp is offered by Loom Design in the surfaces matt white, matt black or corten. It is 30 cm high and has a length and width of 18.4 cm each. The wall mount has a depth of 18 cm and a width of 15 cm. It has a matching surface to the lamp. With the protection class IP65, the Lucerna 30 Solar / Hybrid wall light is suitable as an outdoor light, as it is dustproof and protected against water jets from any direction. This lamp can also be used without the wall bracket as a table lamp.