The Loom Design Lucerna 50 Solar / Hybrid Wall is a wall light with rechargeable battery and integrated solar panel. To recharge, the lamp can simply be taken off the wall mount to be charged via the solar panel integrated on top of the lamp or a USB cable supplied. The battery lasts between nine and twenty hours, depending on the brightness setting. A touch dimmer and a sensor switch are located on the top of the lamp. Briefly pressing the touch dimmer switches the lamp on or off. Long presses dim the light continuously from 5% to 100%. If the touch dimmer is pressed for four seconds, the colour temperature can be changed from 2,700 Kelvin extra warm white to 3,000 Kelvin warm white. The sensor switch can be used to set the wall lamp to switch on or off automatically at dusk. A memory function saves the last selected settings for brightness as well as colour temperature and automatically sets them again the next time the lamp is switched on.
The Lucerna 50 Solar / Hybrid Wall has the appearance of a classic lantern. It is 50 cm high and has a length and width of 18.4 cm. Its wall mount has a depth of 18 cm and a width of 15 cm. The Lucerna 50 wall lamp is available in the surfaces matt white, matt black or corten. The wall bracket is delivered in the matching colour of the lamp. The wall lamp is suitable as an outdoor lamp with the protection class IP65, as it is dustproof and protected against water jets from any direction. The Loom Design lamp can also be used without the wall bracket as a table lamp.