Fil de Fer Pendant LED 50
[Enzo Catellani]
Description
The Catellani & Smith Fil de Fer Pendant LED 50 is a pendant lamp that consists of a mesh of aluminum wire in the form of a sphere. This pendant light is offered in two surfaces: natural aluminum or gold. In the version in natural aluminum the wire is untreated and thus appears silver. In the golden variant, the aluminum was anodized in gold. In the sphere itself twelve LED lamps are installed so that the light seems to glow from the inside to the outside.
This lamp has a diameter of 50 cm. The Fil de Fer Pendant LED 50 is equipped with twelve LED lamps, each with 1 watts of power. It is on site dimmable. This lamp has a dome-shaped canopy measuring 21 x 10.5 cm. The supplied cable is 170 cm long and can be shortened when required.
Technique
| Country of Manufacture |
 Italy |
|---|---|
| Manufacturer | Catellani & Smith |
| Designer | Enzo Catellani |
| Year of design | 2002 |
| protection | IP20 |
| Scope of delivery | LED |
| voltage suitability | 110 - 240 Volt |
| Diameter in cm | 50 |
| material | aluminum |
| cable length | 170 cm |
| height adjustment | height determinable |
| dimming | on site dimmable with a trailing edge dimmer |
| socket/light fixture | G4 |
| LED | inclusive |
| Colour Rendering Index | 80 |
| Color temperature in Kelvin | 2,700 extra warm white |
| canopy dimensions | ∅ 21 cm |
| bulb exchange | on site itself |
| system performance | 12 x 1 Watt |
| Total luminous flux in lm | 900 |
| Dimensions | Ø 50 cm |
